Waste bins and containers
identification systems Waste bins and containers
identification systems

Our identification systems have been developed in close cooperation with our customers from waste management industry so as to meet their needs, expectations and requirements of the market. There are three main types of identification: automatic RFID, manual RFID, and with barcodes.

It facilitates wastebin/container database management and enhances the efficiency of operations.

In this way it improves management and reduces the company operating costs.

It also helps to increase the quality of the services provided.

OUR IDENTIFICATION SYSTEMS:

Detect and signal irregularities during implementation of the planned route

The registered data are available in SEPAN software.

Check

Can be combined with the route and schedule control system.

ET CONTROL

Can be combined with the route planning and scheduling system.

ET PLAN

Work with the on-board computer (PDA terminal)

ET CONNECT

The on-board computer is an important part of RFID system. it enables the driver to communicate with the operator, to check if all the system components operate correctly, to monitor the status of the planned route, to report any irregularities by using predefined notes or own notes with attached photos.

More information

Choose the method of identification for waste bins and containers

Choose the method of identification for waste bins and containers

Automatic RFID
identification

Manual RFID
identification

Identification with
barcodes

Automatic RFID identification Automatic RFID identification

The automatic RFID identification system (ET Auto RFID) may be installed in any waste collection vehicle. Wastebins are identified thanks to RFID antennas and RFID readers mounted on vehicles, and RFID tags mounted in the bins.

The registered data are available in SEPAN software.

Check

Automatic RFID LF identification Automatic RFID LF identification

Equipping garbage trucks with the wastebin identification system enhances the waste collection process by eliminating potential errors.

Designed for:

rear-loaded
garbage truck

side-loaded
garbage truck

front-loaded
garbage truck

KEY SYSTEM FEATURES:

Can be used in various
types of waste
collection vehicles.

Automatic reading
of the transponder
when the wastebin is
being collected.

Supports various
transponder types.

Check our offer

Operates at various
frequencies.

The main components of the automatic LF identification
system wastebins are a set RFID readers and antennas
mounted on vehicles, and RFID transponders mounted in bins.

The main components of the automatic LF identification system wastebins are a set RFID readers and antennas mounted on vehicles, and RFID transponders mounted in bins.

Detect and signal
irregularities during
implementation of the
planned route.

Waste truck lifters adaptation services.

Check

Automatic RFID UHF identification Automatic RFID UHF identification

Combination of vehicle positioning system with RFID transponders operating in UHF standard has resulted in a simple and reliable tool for management and monitoring of waste containers.

Designed for:

hookloader

skip loader

truck with a hydraulic crane system

KEY SYSTEM FEATURES:

Can be used in various
types of waste
collection vehicles.

Automatic reading
of the transponder
when the wastebin is
being collected.

The main components of the automatic UHF identification
system for waste containers or igloo (crane liftable bins) are
the antenna, RFID/UHF reader and the container sensor. The
container sensor allows you to detect a container without an
RFID/UHF transponder.

The main components of the automatic UHF identification system for waste containers or igloo (crane liftable bins) are the antenna, RFID/UHF reader and the container sensor. The container sensor allows you to detect a container without an RFID/UHF transponder.

The advantage of RFID/UHF technology is the ability to read
out RFID/UHF transponders from containers located even a
dozen meters away.

The advantage of RFID/UHF technology is the ability to read out RFID/UHF transponders from containers located even a dozen meters away.

Manual RFID identification Manual RFID identification

Identification of wastebins and/or containers can be carried out manually with a wireless RFID reader, which reads information from an RFID transponder mounted on any type of wastebin/container. Such a manual identification is supported by the ET Manual RFID system.

KEY SYSTEM FEATURES:

Can be used in various
types of waste bins and containers.

Manual reading of the transponder when the
wastebin is being collected.

The registered data are available in SEPAN software.

Check

Equipped with a set of professional devices

Wastebin identification is carried out with a manual RFID reader, which comes with a docking station mounted in the vehicle, and with RFID transponders affixed to wastebins.

Operates at various
frequencies.

Supports various
transponder types.

Check our offer

Manual reader Manual reader

Manual reader brings the new degree of appliance to the
identification technology/system. Depending on the
configuration, Manual Reader can be equipped with reader
enabling to scan RFID, barcodes and/or QR-codes.

Manual reader brings the new degree of appliance to the identification technology/system. Depending on the configuration, Manual Reader can be equipped with reader enabling to scan RFID, barcodes and/or QR-codes.

Diode indicating
operating mode and
scan status.

Wireless induction
charging.

Ergonomic durable housing resistant to mechanical damage
(nylon housing).

Wide range of configuration depending on appliance:

RFID tag reader – operating with
frequencies of
125 kHz and/or
134,2 kHz

Barcode reader

QR-code reader

Diode indicating
operating mode and
scan status.

Wireless induction
charging.

Ergonomic durable housing resistant to mechanical damage
(nylon housing).

Wide range of configuration depending on appliance:

RFID tag reader – operating with
frequencies of
125 kHz and/or
134,2 kHz

Barcode reader

QR-code reader

Find more information about

ELTE Group SYSTEMS FOR WASTE MANAGEMENT

Download PDF

Identification with barcodes Identification with barcodes

Identification of waste collection, its quantity and type is possible
thanks to the barcode technology. The ET Bar Code system is a
solution for monitoring the selective collection of municipal waste
using the bar code technology.

Identification of waste collection, its quantity and type is possible thanks to the barcode technology. The ET Bar Code system is a solution for monitoring the selective collection of municipal waste using the bar code technology.

KEY SYSTEM FEATURES:

Can be used in various
types of wastebins,
containers and bags.

Tags may be printed out
via a dedicated
application.

Equipped with a
set of professional
devices.

Identification is made
with a manual barcode
reader, which comes with
a docking station
mounted in the vehicle,
and with barcode tags
affixed to the various
types of wastebins,
containers and bags.

Identification is made with a manual barcode reader, which comes with a docking station mounted in the vehicle, and with barcode tags affixed to the various types of wastebins, containers and bags.

It is possible to
manually read barcode
tags when the waste is
being collected.

Use of various types of
barcode tags.

Regardless of the identification method,
gathered data allows for preparing the clearing
documentation with a list of emptied waste
bins and collection containers. The registered
data are available in SEPAN software.

Regardless of the identification method, gathered data allows for preparing the clearing documentation with a list of emptied waste bins and collection containers. The registered data are available in SEPAN software.

More about SEPAN

Our Offer

Waste bins and containers identification systems Waste bins and containers identification systems

OUR IDENTIFICATION SYSTEMS:

Detect and signal irregularities during implementation of the planned route

The registered data are available in SEPAN software.

Can be combined with the route and schedule control system.

Can be combined with the route planning and scheduling system.

Work with the on-board computer (PDA terminal)

Choose the method of identification for waste bins and containers Choose the method of identification for waste bins and containers

Automatic RFID identification

Manual RFID identification

Identification with barcodes

Automatic RFID identification Automatic RFID identification

Automatic RFID LF identification Automatic RFID LF identification

KEY SYSTEM FEATURES:

Can be used in various types of waste collection vehicles.

Automatic reading of the transponder when the wastebin is being collected.

Supports various transponder types.

Operates at various frequencies.

Detect and signal irregularities during implementation of the planned route.

Waste truck lifters adaptation services.

Automatic RFID UHF identification Automatic RFID UHF identification

KEY SYSTEM FEATURES:

Can be used in various types of waste collection vehicles.

Automatic reading of the transponder when the wastebin is being collected.

Manual RFID identification Manual RFID identification

KEY SYSTEM FEATURES:

Can be used in various types of waste bins and containers.

Manual reading of the transponder when the wastebin is being collected.

Equipped with a set of professional devices

Operates at various frequencies.

Supports various transponder types.

Manual reader Manual reader

Diode indicating operating mode and scan status.

Wireless induction charging.

Ergonomic durable housing resistant to mechanical damage (nylon housing).

Wide range of configuration depending on appliance: RFID tag reader – operating with frequencies of 125 kHz and/or 134,2 kHz Barcode reader QR-code reader

Diode indicating operating mode and scan status.

Wireless induction charging.

Ergonomic durable housing resistant to mechanical damage (nylon housing).

Wide range of configuration depending on appliance: RFID tag reader – operating with frequencies of 125 kHz and/or 134,2 kHz Barcode reader QR-code reader

ELTE Group SYSTEMS FOR WASTE MANAGEMENT

Identification with barcodes Identification with barcodes

KEY SYSTEM FEATURES:

Can be used in various types of wastebins, containers and bags.

Tags may be printed out via a dedicated application.

Equipped with a set of professional devices.

It is possible to manually read barcode tags when the waste is being collected.

Use of various types of barcode tags.

Our customers include

Waste bins and containers
identification systems Waste bins and containers
identification systems

Choose the method of identification for waste bins and containers

Choose the method of identification for waste bins and containers

Automatic RFID
identification

Manual RFID
identification

Identification with
barcodes

Can be used in various
types of waste
collection vehicles.

Automatic reading
of the transponder
when the wastebin is
being collected.

Supports various
transponder types.

Operates at various
frequencies.

Detect and signal
irregularities during
implementation of the
planned route.

Can be used in various
types of waste
collection vehicles.

Automatic reading
of the transponder
when the wastebin is
being collected.

Can be used in various
types of waste bins and containers.

Manual reading of the transponder when the
wastebin is being collected.

Operates at various
frequencies.

Supports various
transponder types.

Diode indicating
operating mode and
scan status.

Wireless induction
charging.

Ergonomic durable housing resistant to mechanical damage
(nylon housing).

Wide range of configuration depending on appliance:

RFID tag reader – operating with
frequencies of
125 kHz and/or
134,2 kHz

Barcode reader

QR-code reader

Diode indicating
operating mode and
scan status.

Wireless induction
charging.

Ergonomic durable housing resistant to mechanical damage
(nylon housing).

Wide range of configuration depending on appliance:

RFID tag reader – operating with
frequencies of
125 kHz and/or
134,2 kHz

Barcode reader

QR-code reader

Can be used in various
types of wastebins,
containers and bags.

Tags may be printed out
via a dedicated
application.

Equipped with a
set of professional
devices.

It is possible to
manually read barcode
tags when the waste is
being collected.

Use of various types of
barcode tags.